Setting The Channel - Auriol Z31915 Operation And Safety Notes

If you want your weather station to announce the absolute air pressure, proceed
like this:
Press and hold the HISTORY ABS / REL button for approx. 3 seconds. After-
wards press the + or – button, to change to the absolute air pressure. Confirm
by pressing the HISTORY ABS / REL button.

Setting the channel

The weather station receives the outdoor sensor signal automatically after you have
made all the settings.
Note: In the event of interference from nearby equipment transmitting radio
signals, the symbol for humidity (outdoor)
during this time. Please select a different channel for the outdoor sensor by pressing
the CH button on the weather station or the channel selector switch
37
outdoor sensor. The relevant data is shown in the LC display.
- 1: Outdoor sensor channel 1
- 2: Outdoor sensor channel 2
- 3: Outdoor sensor channel 3
- : automatic channel change
30 GB
and outdoor temperature
22
flashes
25
on the
44