Table 3-4 Roller Bearing Versions - Siemens SIMOTICS M-1PH818 Operating And Installation Instructions

Ambient conditions
The standard machines are not suitable for use in corrosive atmospheres, atmospheres with
a high salt content, or outdoor applications.
Roller bearings
The machines are equipped with different types of roller bearings depending on the version
and the operating conditions described in the order. If the machine is equipped with a
regreasing system, you will find the relevant data on the machine's lubricant plate.
The following standard roller bearing versions are available:
Table 3-4
Design
Standard design and "Performance"
Version for increased radial forces
Paint finish
The machine is painted according to the instructions in your order.
SIMOTICS M-1PH8 1PH818., 1PH822., 1PH828.
Operating Instructions 10/2017
Roller bearing versions
Bearings
Drive end deep-groove ball bearing as spring-loaded floating
bearing
Non-drive end deep-groove ball bearing as fixed bearing
Drive end cylindrical-roller bearing as floating bearing
Non-drive end deep-groove ball bearing as fixed bearing
Description
27