Table of Contents
Advertisement
Maintenance
Through careful and regular maintenance, inspections, and overhauls you can detect faults at
an early stage and resolve them. This means that you can avoid consequential damage.
Operating conditions and characteristics can vary widely. For this reason, only general
maintenance intervals can be specified here. Maintenance intervals should therefore be
scheduled to suit the local conditions (dirt, starting frequency, load, etc.).
Observe the following when carrying out any work on the machine:
● Comply with the general safety instructions (Page 15)
● Comply with the applicable national and sector-specific regulations at the place of
● When using the machine within the European Union, comply with the specifications laid
Note
Service Center
Please contact the Service Center (Page 161), if you require support with servicing,
maintenance or repair.
9.1
Observe the operating instructions of the components
When carrying out any maintenance and repair work, always carefully observe the
manufacturer's operating instructions for additional components.
See also
Operating instructions, holding brake (Page 169)
Operating instructions for the three-phase EC external fan, suction, SK180 (Page 249)
Operating instructions for the three-phase EC external fan, suction, SK225 (Page 263)
SIMOTICS M-1PH8 1PH818., 1PH822., 1PH828.
Operating Instructions 10/2017
installation
down in EN 50110‑1 regarding safe operation of electrical equipment.
9
105
Advertisement
Table of Contents
