Table of Contents
Advertisement
For the "Performance" version, only use these special greases. The Performance version is
not available for explosion-protected motors.
Table 9-7
Manufacturer
Lubcon
NOTICE
Damage caused by mixing lubrication types
Mixing different greases adversely affects the lubricating properties. Only the manufacturer
provides a guarantee as to whether certain greases can be mixed.
● Never mix different greases.
Regreasing
Regreasing data are stamped on the lubricant plate of the machine:
● Relubrication intervals in operating hours
● Regreasing amount in grams
● Grease type
Regrease the bearing at the latest every 12 months irrespective of the actual number of
operating hours.
NOTICE
Relubrication intervals
The relubrication intervals for roller bearings are different from the servicing intervals for the
machine. The roller bearings may be damaged if the relubrication intervals are not complied
with.
● Pay attention to the instructions on the lubricant plate.
Grease replacement intervals
The grease replacement intervals in these operating instructions or the relubrication intervals
indicated on the plate apply for the following conditions:
● Normal load
● Operation at speeds in accordance with the rating plate
● Low-vibration operation
● Neutral ambient air
● High-quality roller bearing greases
In the case of unfavorable conditions, reduce the relubrication intervals after prior consultation
with the manufacturer.
SIMOTICS M-1PH8 1PH818., 1PH822., 1PH828.
Operating Instructions 10/2017
Grease for the "Performance" version
Grease type
Sintono GPE702
Maintenance
9.2 Inspection and maintenance
113
Advertisement
Table of Contents
