Cleaning - Fluke DTX-1800 Technical Reference Handbook

Updating with a Memory Card (DTX-1800, DTX-1200)
You can update the tester's software using a memory card
that contains the software update file.
1 Download the DTX CableAnalyzer update file from the
Fluke Networks website, or contact Fluke Networks to
get the update by other means. Save the file to your
hard drive.
2 Copy the software update file to a memory card.
3 Connect the tester and smart remote together using a
permanent link and a channel adapter or two channel
adapters and a patch cord. Turn on the tester and the
smart remote.
4 Put the memory card in the tester.
5 Turn the rotary switch to SPECIAL FUNCTIONS; then
select Update Software.
L
6 Press Yes to start the update procedure.
7 When the tester is updated, it reboots, then prompts
you about updating the smart remote's software. Press
K
OK to update the smart remote's software.
8 To verify the update, turn the rotary switch to SPECIAL
FUNCTIONS; then select Version Information.
Maintenance and Specifications
Updating the Limits or Cable Types Database
Fluke Networks may release a test limits or cable types
database that is not part of a software update. To install a
new database in your tester, use the Modify DTX Test
Limits utility in LinkWare software. See the LinkWare online
help for details.

Cleaning

Clean the display with glass cleaner or isopropyl alcohol and
a soft, lint-free cloth. Clean the case with a soft cloth
dampened with water or water and a mild soap.
W
To avoid damaging the display or the case, do not
use solvents or abrasive cleansers.
For information on cleaning fiber connectors, see page 7-9.
13
Maintenance
Caution
13-5