Memory Functions; Storage Locations And Capacities; Checking The Memory Status - Fluke DTX-1800 Technical Reference Handbook

Storage Locations and Capacities

All DTX Series testers can store up to 250 Cat 6 Autotest
results, including graphical data, in internal memory.
The maximum capacity of internal memory depends on the
space taken by the tester's software.
The DTX-1800 and DTX-1200 can store up to 500 Cat 6
Autotest results, including graphical data, on a 16 MB
removable memory card.
The DTX-1800 and DTX-1200 testers can use Multi Media
Card (MMC) or Secure Digital memory cards (SD).

Memory Functions

Checking the Memory Status

To check the memory status, turn the rotary switch to
D
SPECIAL FUNCTIONS, use
H
Status; then press .
L
Or, press Memory from the main Autotest screen.
Figure 12-1 describes the memory status screen.
Chapter 12
to highlight Memory
12-1