Fluke DTX-1800 Technical Reference Handbook page 187

A
Tester and smart remote with fiber modules and
connector adapters installed (match connector adapters
to the connectors in the link)
B
Memory card (optional)
C
Two AC adapters with line cords (optional)
D
Reference test cord. Match the fiber to be tested. SC
connector at one end. Match the link connectors at the
other end.
Figure 7-16. Equipment for Testing in Far End Source Mode (Method B)
Certifying Fiber Optic Cabling
Autotest in Far End Source Mode
E
Reference test cord. Match the fiber and connectors in
the link.
F
Mandrel. Recommended when testing multimode fiber
with DTX-MFM2 modules. See page 7-11.
G
Fiber cleaning supplies
7
amd51f.eps
7-35