Step 5: Selecting A Cable Id Source; Certifying Twisted Pair Cabling; Required Equipment - Fluke DTX-1800 Technical Reference Handbook

DTX Series CableAnalyzer
Technical Reference Handbook

Step 5: Selecting a Cable ID Source

Cable IDs are names you enter for tests you save. You can
select IDs from a pre-generated list, or enter them manually
after each test. For this tutorial, you will enter IDs manually.
To select a cable ID source:
5-1 Turn the rotary switch to SETUP.
D
5-2 Use to highlight Instrument Settings; then press
H
.
H
5-3 Press to select Cable ID Source.
D
5-4 Use to highlight None; then press
2-4

Certifying Twisted Pair Cabling

This tutorial familiarizes you with testing twisted pair
cabling by guiding you through the following tasks:
•
Attaching twisted pair adapters
•
Checking the battery status and verifying operation
with twisted pair adapters
•
Running an Autotest
•
Viewing the Autotest results
•
Saving the results

Required Equipment

H
.
Figure 2-2 shows the equipment for testing twisted pair
cabling.