3.4
Name plate
3.4.1
Name plate for model with integral mount design (dual-compartment housing)
Fig.
1 Model number (for more detailed information about
the technical design, refer to the data sheet or the
order confirmation)
2 Order no.
3 Meter size and nominal pressure rating
4 Material: Flange/lining/electrode
5 T
= max. permissible fluid temperature
med
T
= max. permissible ambient temperature
amb
6 Calibration value Qmax DN
7 Calibration value Ss (span)
Calibration value Sz (zero point)
8 Communications protocol of transmitter
9 Excitation frequency of sensor coils
10 Software version
11Year of manufacture
12CE mark
13Serial number for identification by the manufacturer
14 Client-specific TAG number (if specified)
15 Protection type according to EN 60529
16Supplementary information: EE = grounding
electrodes, TFE = partial filling electrode
IMPORTANT (NOTE)
Meters with 3A approval are labeled with an additional plate.
SM/FEX300/FEX500/FM/CSA-EN
1
2
3
4
5
6
7
8
9
10
11
17Accuracy to which the unit was calibrated (e.g., 0.2%
of rate)
18Version level (xx.xx.xx)
19 Label indicating whether the unit is subject to the
Pressure Equipment Directive (PED).
Information on the relevant fluid group.
Fluid group 1 = hazardous fluids, liquid, gaseous.
(Pressure Equipment Directive = PED).
If the pressure equipment is not subject to the
Pressure Equipment Directive 2014/68/EU, it is
classified in accordance with SEP (= sound
engineering practice) as per Art. 3 Para. 3 of the PED.
If no such information is present, it means that the
device does not claim to comply with the requirements
of the Pressure Equipment Directive 2014/68/EU.
Water supplies and connected equipment accessories
are classed as an exception in accordance with
guideline 1/16 of Art. 1 Para. 3.2 of the Pressure
Equipment Directive.
20Ex mark according to FM (example)
21Ex mark according to cFM (example)
FEX300, FEX500
Device designs
12
13
14
15
16
17
18
19
20
21
G00629
EN - 11