After Use; Optional Accessories - Makita DLS714 Instruction Manual

1
1. Triangular rule 2.
turn table
6. Make sure that the pointer on the arm indicates 0°
on the bevel scale. If it does not indicate 0°, loosen the
so that it indicates 0°.
1
2
1. Bevel scale 2.
45° bevel angle
1.
1. Loosen the lever and tilt the blade to the left fully.
2. Make sure that the pointer on the arm indicates
45° on the bevel scale. If the pointer does not indicate
on the right side of the arm until the pointer indicates
45°.
2
3
3. Top surface of
3
3.
1

After use

according to the directions in the previously covered
section titled "Blade guard". Lubricate the sliding por-
tions with machine oil to prevent rust.
When storing the tool, pull the carriage toward you fully
so that the slide pole is thoroughly inserted into the turn
base.
Centers, always using Makita replacement parts.
OPTIONAL
ACCESSORIES
WARNING:
ments are recommended for use with your Makita tool
WARNING:
attachment for its stated purpose. Misuse of an acces-
If you need any assistance for more details regarding these
NOTE:
tool package as standard accessories. They may
differ from country to country.
23 ENGLISH
These Makita accessories or attach-
The use of any other accesso-
Only use the Makita accessory or