Table of Contents
Advertisement
W&T
1.2 Factory Default setting
The list contains an overview of the most important settings.
Detailed information on the respective parameters can be found
in later sections of this manual.
Network settings
Hardware connection:
IP address:
Gateway address:
Subnet mask:
DHCP:
TCP port for incoming calls:
1
To prevent unintended address assignments or changes,
we recommend deactivating the DHCP, BOOTP and RARP
protocols if they are not expressly used in the respective
network environment.
Serial settings
Baud rate:
Data bits:
Parity:
Stop bits:
Handshake:
Auto negotiating
0.0.0.0
0.0.0.0
255.0.0.0
Active
8000
9600
8
NO
1
Hardware (RTS/CTS)
Quickstart
9
Advertisement
Table of Contents
