W&T 58620 Manual page 13

W&T
Assigning the IP address
same subnet. When started, WuTility automatically searches the
local network for connected W&T network devices and creates
an inventory list. This search process can be repeated manually
as often as desired by clicking on the Scan button:
Within the inventory list you can identify the desired LAN-Mo-
dem based on its MAC address. For initial installations its IP
address is 0.0.0.0.
Select the LAN-Modem and click on the IP address button:
To use the LAN-Modem with dynamic IP parameters, select in
the following dialog box the corresponding option DHCP or
BOOTP and then click on the Next button. Detailed information
about these modes can be found in the section IP Assignment
using DHCP protocol and IP Assignment using BOOTP protocol.
The Static option allows you to assign fixed basic parameters
while simultaneously disabling DHCP and BOOTP protocols in
the LAN-Modem. Enter the desired values for IP address, subnet
mask and gateway address in the corresponding entry fields.
Subject to error and alteration 13