Nn (At%N[0|1]) - W&T 58620 Manual

W&T

5.4.25 %Nn (AT%N[0|1])

Remote maintenance over the network allowed
Default setting: 1 = allowed
Loading firmware updates and copying configuration data is
possible either through the serial port or over the network. To
protect against misuse of network-side remote maintenance,
the &N command makes it possible to suppress this
functionality.
• %N0
Remote maintanance will be deactivated.
• %N1
Remote maintanance will be activated.
Additional information: Section Firmware-Update and Section
Reading/sending Configuration profiles.
Subject to error and alteration
Modem Operation
67