W&T
5.4.19 &Yn (AT&Y[0|1])
Active Profile Read
This command specifies which of the two configurations stored
in the profiles the LAN-Modem uses after being turned on or
after a reset.
• &Y0
Specifying the configuration profile 0 after a reset.
• &Y1
Specifying the configuration profile 1 after a reset.
Additional information can be found in the following sections:
Zn:
Reset modem to Profile 0 or 1
&V1: Read the configuration profiles
&Wn: Store the current settings in the specified profile
Subject to error and alteration
Modem Operation
61