W&T 58620 Manual page 74

W&T
•
Both parties (switch and LAN-Modem) are operated in Auto-
Negotiation mode.
•
Both parties (switch and LAN-Modem) are configured for the
same (fixed) transmission speeds and duplex mode.
1
Changing the link speed is activated only after saving
and exiting the telnet or WBM session by means of an
automatic Com-Server reset. Data from any open network
connections is lost. If the newly selected setting is not supported
by the port used on the switch ort hub, the Com-Server may
then not be accessible.
74
Appendix