Table of Contents
Advertisement
W&T
5.4.23 %Pn (AT%P[0|1|2])
Specifying the parity bit
Default setting: 0 = no parity
This command determines if and, if yes, what parity is used for
the serial data format.
• %P0 = no parity
• %P1 = odd parity
• %P2 = even parity
1
The %P command has a delayed effect. The first OK reply
is still with the old data format.
1
Successive commands in the same command line (such
as &W for saving) are ignored. This ensures that any
inadvertent change in the baud rate can be restored by
resetting the LAN-Modem.
Subject to error and alteration
Modem Operation
65
Advertisement
Table of Contents
