W&T 58620 Manual page 16

W&T
the following example will assign IP address 172.17.231.99,
subnet mask 255.255.255.0 and gateway 172.17.231.52 to the
LAN-Modem.
xxx
IP no.+<ENTER>:
172.17.231.99,255.255.255.0,172.17.231.52
172.17.231.99,255.255.255.0,172.17.231.52-1
2.2.2 Activating/Deactivating DHCP, BOOTP/RARP
The DHCP and BOOTP/RARP function of the LAN-Modem can
be turned off as part of assigning the IP address serially. To
activate/deactivate the DHCP or BOOTP/RARP client enter one
of the following options directly appended (no space!) to the IP
address and confirm with <Enter>.
•
-0
DHCP and BOOTP/RARP = OFF
•
-1
DHCP = OFF,
BOOTP/RARP = ON
•
-2
DHCP = ON
BOOTP/RARP = OFF
Example: Deactivation of DHCP and BOOTP/RARP
xxx
IP no.+<ENTER>:
172.17.231.99-0
172.17.231.99
1
To prevent unintended address assignments or changes,
we recommend deactivating the DHCP and BOOTP/RARP
protocols if they are not expressly used in the respective
network environment. LAN-Modems with incorrectly assigned IP
addresses can be easily found after the fact using the scan
function of the WuTility management tool and reconfigured.
16
-> LAN-Modem
<- LAN-Modem
-> LAN-Modem
<- LAN-Modem
Assigning the IP address
-> LAN-Modem
<- LAN-Modem
-> LAN-Modem
<- LAN-Modem