5 Settings
5.1
Setpoint / limit setting
5.1.1 TW, STW (STB), STB
22
✱ Open housing.
➩ Chapter 3.2 "Opening the housing", page 10.
✱ Set the limit on the setpoint spindle ( 5 ) using a screwdriver.
✱ Close housing
➩ Chapter 4.2.1 "Closing the housing", page 21.
( 1 ) Upper stop
( 2 ) Setpoint marker
( 3 ) Lower stop
( 4 ) Scale graduation
( 5 ) Setpoint spindle