JUMO ATHf-SW Operating Instructions Manual page 14

3 Mounting
Permissible
flow velocity
A
14
Temperature:
Thermal medium:
Tube diameter D:
Permissible flow velocity (m/sec) at maximum permissible pressure loading
and different immersion tube lengths S
The values below refer to the maximum loading on the probe mounting con-
cerned. The maximum pressure that can be sealed depends on the installation
conditions and may therefore be lower.
Temperature:
Thermal medium:
Tube diameter D:
Permissible flow velocity (m/sec) at maximum permissible pressure loading
and different immersion tube temperatures t.
+200°C
air ( 1 )
water, oil ( 2 )
08 mm
- - - - - - - - - - - - 10 mm
. . . . . . . . . . . . . . 15 mm
+200°C
air ( 1 )
water, oil ( 2 )
08 mm
- - - - - - - - - - - - 10 mm
. . . . . . . . . . . . . . 15 mm