Figure 2-14 Task Bar & Command Bar
2.5.5 The Soft Keypad
In applications that accept keypad input, the Soft Input Panel (SIP) can be
used to enter data using the stylus. The SIP is a software, QWERTY-style
keyboard.
To open the SIP, press the Fn key and "文字" to open the soft keyboard and
press the Fn key and "文字" again to close the soft keyboard.
Use the stylus to select letters, numbers, or symbols from the Soft Input Panel
for the current application.
2.5.6 Setting Up Wireless LAN RF
Setting Up Wireless LAN
1) Press "Start" -- "Setting" -- "Control Panel" -- Double tap "WLAN" icon to
Enable " WLAN電源設定 ".
2) Enable WLAN power icon to power switch on WLAN module.
3) Tap " WLAN設定 " to open WLAN application.
3) Tap " AP Browser ", tap "Scan" button to Configure/Refresh the network.
Command Bar
Task Bar
2-30
OPTICON
User's manual
H-15AJ