Table of Contents
Advertisement
The connection you just created appears as an icon in the
"Network and Dial-up Connections" folder.
Set up a point-to-Point Protocol(PPP) account with an ISP
and obtain the following information:
Once you have established an account, create a new connection
on your device. When creating this connection, you should be
able to use all of the default TCP/IP settings provided in the Make
New Connection Wizard. If
you can't connect using the default settings, contact your ISP or
access
your ISP's Web site for specific TCP/IP information as well as
primary and secondary DNS address.
Modify connection setting
Table 3-12 Network and Dial-up Connections
Select "TCP/IP Settings". In the "General" tab, ensure
"Use Server-assigned IP address" is selected. In the
"Name Servers" tab, ensure "Use Server-assigned
addresses" is selected, and select "OK". If you are unable
to connect with these default settings, see your ISP or
network administrator for specific TCP/IP information.
Select the "Next" button and type the telephone number.
Select the "Finish" button.
Access telephone number
User name
Password
Select Start > Settings > Network and Dialup
Connections
Select the icon for connection settings you want to modify.
Select File > Properties, or double- tap the appropriate
icon.
Select desired options. There may be additional settings
that depend on the connection. To modify, select the icon
and select the icon and select Advanced Settings... from
the menu.
3-19
OPTICON
User's manual
H-15AJ
Advertisement
Table of Contents
