Table of Contents
Advertisement
OPTICON
User's manual
H-15AJ
To turn OFF the Terminal
Press the power key again. This action does not actually turn off the Terminal, it
only turns the Terminal into suspend mode. All running applications remain as you
left them, until you press the power key again to resume operation of the
Terminal.
2.4.3 Calibration of the touch Screen
On the initial boot-up of the Terminal, the stylus
calibration screen opens. Use the stylus to
press and hold briefly on the center of each
target as it around moves the screen.
If necessary, adjust the backlight on the
Terminal to make the screen readable
(see chapter 2.4.4 Adjusting the brightness).
When you experience that the touch screen
function is poor or the operation does not
match the exact location it should be, please
recalibrate the screen by using the stylus to
tap the Start > Settings > Control Panel
Figure 2-11 Calibration
> Stylus, to open the "Calibration" to recalibrate again.
2.4.4 Adjusting the brightness
The factory default for the brightness is in middle level. You can adjust the
brightness to meet your environment and comfort as:
1) Double tap brightness icon.
2) Increase brightness: Press the Navigation key
to increase brightness
3) Decrease brightness: Press the Navigation key
to decrease brightness
2-21
Advertisement
Table of Contents
