Virtual Outputs; Remote Devices - GE M60 Instruction Manual

6.2 STATUS
PATH: ACTUAL VALUES
 VIRTUAL OUTPUTS

The present state of up to 96 virtual outputs is shown here. The first line of a message display indicates the ID of the virtual
output. For example, 'Virt Op 1' refers to the virtual output in terms of the default name-array index. The second line of the
display indicates the logic state of the virtual output, as calculated by the FlexLogic™ equation for that output.
a) STATUS
PATH: ACTUAL VALUES
 REMOTE DEVICES
 STATUS
6
The present state of up to 16 programmed remote devices is shown here. The
cates whether or not all programmed remote devices are online. If the corresponding state is "No", then at least one
required remote device is not online.
6-6
 
STATUS

VIRTUAL OUTPUTS

Virt Op
Off
Virt Op
MESSAGE
Off
Virt Op 96
MESSAGE
Off
 
STATUS REMOTE DEVICES STATUS
ALL REMOTE DEVICES
ONLINE: No
REMOTE DEVICE
MESSAGE
STATUS: Offline
REMOTE DEVICE
MESSAGE
STATUS: Offline
REMOTE DEVICE 16
MESSAGE
STATUS: Offline
M60 Motor Protection System
Range: On, Off
1
Range: On, Off
2
↓
Range: On, Off
Range: Yes, No
Range: Online, Offline
1
Range: Online, Offline
2
↓
Range: Online, Offline
ALL REMOTE DEVICES ONLINE
6 ACTUAL VALUES
6.2.8 VIRTUAL OUTPUTS

6.2.9 REMOTE DEVICES

message indi-
GE Multilin