Table of Contents
Advertisement
2. FOR SAFE OPERATION
For your own safety read the instruction manual before operating
DRILL PRESS.
DANGER
HIGH VOLTAGE
TURN OFF THE POWER
BEFORE SERVICE
1. SWITCH the POWER OFF before setting, inspecting
lubricating, cleaning or changing the drill bit.
2. Always wear the eye protection.
3. Do not wear gloves, necktie, necklaces, rings or loose
clothing.
4. To clamp work piece or brace against column to prevent
material rotation.
5. Use recommended speed for drill bit, and work piece
material.
3. GENERAL SAFETY INSTRUCTION
DANGER
1. Keep guards in place and in working order.
2. Remove adjusting key and wrenches. Be in the habit of
checking to see that keys and adjusting wrenches are
removed from tool before turning it on.
3. Keep work area clean. Cluttered areas and benches invite
accidents.
4. Do not use in dangerous environment. Do not use power
tools in damp or wet locations or expose them to rain. Keep
work area well lighted.
5. All visitors should be kept safe distance from work area.
6. Make workshop kid proof with padlocks, master switches, or
by removing starter key.
7. Do not force tool. It will do the job better and safer at the rate
for which it was not designed.
GENERAL SAFETY
INSTRUCTION
5
Advertisement
Table of Contents
