Resistance Measurement - AEMC 500 User Manual

4.3

Resistance Measurement

• Turn the rotary range switch to the
• Insert the red test lead to the red "+" input jack and the black lead
to the black "COM " input jack.
• Bring the test probe tips into contact with the sample under test.
• If overload "
ment range or the circuit is open.
WARNING: When making a resistance measurement,
make sure that the power is off (dead circuit), and that
all capacitors in the measured circuit are fully discharged.
10
1.800.561.8187
" is displayed, the resistance exceeds the measure-
MODEL 500
®
CL AMP METER
I N S T R U M E N T S
600V CAT II
400A
300V CAT III
H HOLD
Ω
V
A
OFF
COM
!
CAT II
600V
www.
range.
Clamp-on Meter Model 500
information@itm.com
.com