Free Mixers - GRAUPNER GR-12L SUMD+T Manual

Free mixers

RX FREE MIXER < >
>MIXER:
MASTER CH:
>SLAVE CH:
>TRIM: +0%
TRAVEL-: +100%
TRAVEL+: +100%
12 / 16
Up to five mixers can be contemporaneously programmed. You can
switch between Mixer 1, Mixer 2, 3, 4 ... and mixer 5 in the "Mixer"
1
line.
3
4
The following settings only affect the mixer selected in this line.
FROM CHANNEL:
The signal source (or source channel) is mixed in to the target chan-
nel (TO CHANNEL) with a programmable amount. The method of
setting up the values is analogous to the "Free mixers" menu in HoTT
transmitters.
TO CHANNEL:
Part of the source channel signal (FROM CHANNEL) is mixed into the
target channel (TO CHANNEL). The mixer ratio is determined by the
percentage values entered in the "TRAVEL-" and "TRAVEL+" lines.
Select "0" if you do not require the mixer.
Mixer ratio (TRAVEL-/+): in these two lines you can define the mixer
ratio in relation to the source channel (FROM CHANNEL); the value
is set separately for both directions.
Trim
Offset value of the mixer.
Trim range: -30... 0...+30
Travel -
Settles the lowest limit for the output channel.
Range: -100...0...+100
Travel +
Settles the highest limit for the output channel.
Range: -100...0...+100
S1037_S1012_jh_V1