Information Messages - Pneumercator TMS2000 Operation & Maintenance Manual

Information Messages:

Information messages convey statuses generally consi dered to be advisory. These types of messages appear only on the TMS displ ay until acknowledge d
via Front panel or Edit enable buttons. They do not genera te au dible/v isual alarms, are not capture d in any of the system logs and do not generate printed
repor ts.
Info Description
#
SETPOIN T UNITS - MODE CHANGE
1
ADVISORY
2 UNGAUG EABL E LEV EL
Event Descr iption for Informat ion Mes sages
Item I D Nam e Notes
TMS informs user in the TMS VIEW menu that the globally program med
n/a n/a Setpoints units for all enabl ed tanks have been changed in the Config Header
menu.
TMS informs user that the product float for the indicated tank has reached a
float collar stop or its minimum gaugeabl e level. Because the stop is some
distance above the actual tank bottom, an alternating minimum gaugeable
tank # n/a level and the message "Low Product" will be display ed. This con dition is
usually asso ciated with probes requiring "Special Tank TOP moun ting" .
These minimum gauging poin ts are progr ammed for all enabled tan ks in the
changed in t he Config Ta nk Menu .