Siemens SINAMICS G130 Operating Instructions Manual page 26

Basic operator panel 20

Hide thumbs Also See for SINAMICS G130:

Table of Contents

Setting parameters with the BOP20

4.5 Important functions via BOP20

Identification via LED

The main component of a drive object (e.g. Motor Module) can be identified using the index

of p0124. The ready LED on the module starts to flash. The index corresponds to the index

in p0107; the drive object type can be identified using this parameter.

On the drive objects, the components can also be identified using the following parameters:

● p0124 power unit detection via LED

● p0144 Voltage Sensing Module detection via LED

● p0144 Sensor Module detection via LED

● p0154 DRIVE-CLiQ hub identification using LED

● p0154 Terminal Module detection via LED

Acknowledge error

All errors whose cause has been rectified can be acknowledged by pressing the Fn key.

Basic Operator Panel 20 (BOP20)

Operating Instructions, 03/2013, A5E00809375A

Table of Contents