Eco Dect; Alarm Clock - Gigaset C530 IP Manual

Hide thumbs Also See for C530 IP:
Table of Contents

Advertisement

Available languages

Available languages

Gigaset C530 IP / LUG - USA en / A31008-XXXXX-XXXX-X-XX / add_features.fm / 25.03.2015

ECO DECT

ECO DECT
ECO DECT uses less energy and reduced transmission power.
Reducing transmission power (radiation)
In normal operation (default setting):
The device range is set to maximum as default. This guarantees optimum wireless management.
In idle status, the handset will not function (as it is not transmitting). Only the base will maintain
contact with the handset via a low wireless signal. During a call, the transmission power
automatically adapts to the distance between the base and handset. A closer distance to the
base means lower transmission power.
Reducing the range and thereby lowering transmission power by up
to 80%
In many spaces such as apartments, business facilities and offices, the maximum range is not
necessary. If you deactivate the Maximum Range setting, you can reduce the transmission
Ï
power during a call by up to 80%, using half of the range.
v
¤
Display icon for reduced range

Alarm clock

Prerequisite: Date and time are set.
É
Activating/deactivating the alarm clock and setting the wake-up time
v
¤
Activation:
¤
Time:
Occurrence:
Volume:
Melodie:
¤
¼
Save
The
icon and wake up time are shown in idle display.
A wake-up call is shown on the display (
melody. The wake-up call sounds for 60 seconds. If no key is pressed, the wake-up call is
repeated twice at five minute intervals and then switched off.
During a call, the alarm is only indicated by a short tone.
Deactivating the wake-up call/repeating after a pause (snooze mode)
Deactivate the wake-up call:
Repeat the wake-up call:
The wake-up call is deactivated and then repeated after 5 minutes. After the second repetition
the wake-up call is deactivated completely.
86
¤
¤
q ECO DECT
OK
¢
page 92.
¤
¤
q Alarm Clock
OK
¤
r On / Off
Enter the wake-up time in 4-digit format.
¤
Monday-Friday / Daily
¤
r Set the volume.
¤
r Select melody.
¤
Press the display key OFF.
¤
Press the display key Snooze or any key.
¤
¤
q Maximum Range
OK
¤
OK
¢
page 93) and signalled with the selected ringtone
¤
³
Change (
= activated)

Advertisement

Table of Contents
loading

Table of Contents