Gigaset C530 IP Manual page 55

Gigaset C530 IP / LUG - USA en / A31008-XXXXX-XXXX-X-XX / settings.fm / 25.03.2015
Configuring the system settings
Launching the IP wizard:
v Ï
¤ ¤
You will see the following in the display:
The procedure for the VoIP wizard is described on page 14.
Each time you run the VoIP wizard you can configure/reconfigure
one VoIP connection (IP account).
¤
Restart the VoIP wizard if you wish to configure/reconfigure
another VoIP connection.
Note
You can also use the Web configurator to configure and
manage VoIP connections (
Automatic update for the VoIP provider settings
After the first download of the VoIP provider settings, your phone will check daily whether a
newer version of the file for your VoIP provider is available via the Internet on the configuration
server.
Auto configuration has been used to download VoIP settings (
If there is new configuration data, this is automatically downloaded to your phone (without
notification).
Manual VoIP configuration with the IP wizard
If there is new provider data, the idle display on the handset displays the message New profile
available.
¤
Confirm prompt by pressing Yes.
The new data for your VoIP provider will be downloaded and saved on the phone.
If you respond to the prompt with No, the handset returns to idle status. Your telephone will not
remind you of this new profile again. The message will only be shown again if a newer version of
the provider data is available.
A profile update will only be started if no other profile or firmware update is taking place at the
time.
Assigning send and receive connections to internal participants
If you have several connections configured for your telephone system, you can do the following
for each internal participant:
u
Assign a send connection or allow the internal participant to select the connection for each
external call (select line).
u
Assign one or several receive connections. Only calls received via one of the assigned
connections are signalled on the device.
54
¤ ¤
q Telephony
OK OK
¢
page 108).
¤ ¤
q VoIP Wizard
¤
Enter the system PIN if required.
OK
IP Wizard
?
Start IP
installation wizard?
No
¢
page 16)
¤
OK
Yes