Gigaset C530 IP Manual page 108

Gigaset C530 IP / LUG - USA en / A31008-XXXXX-XXXX-X-XX / web-conf.fm / 25.03.2015
The Invalid Certificates list contains the certificate used to make the connection. You can display
information on the certificate by highlighting it and clicking on the [Details] button. This
information includes who issued the certificate (certification authority) and for whom, as well as
its validity period.
You must use the information to decide whether to accept or reject the certificate.
If you accept the certificate, depending on its type, it is transferred to one of the Server
Certificates / CA Certificates lists (even if it has already expired). If a server responds again with
this certificate, this connection is accepted immediately.
If you decline the certificate, it is transferred to the (rejected) list with the label Server
Certificates. If a server responds again with this certificate, this connection is rejected
immediately.
Managing base connections; activating/deactivating connections
You can manage your base connections using the web page:
¤
Settings
This web page displays a list with all possible connections and your status (e.g. connected,
registered):
u
Fixed Line Connection
You do not have to configure the fixed line network connection. You can make or receive calls
on the fixed line network connection once your phone is connected to the fixed line network
connection.
You can change the name of the fixed line network connection and the setting for the Recall
time by clicking the corresponding [Edit] button.
The name entered is shown, e.g. for calls to your fixed line network connections, in the
displays of the registered handsets and in the call list.
The flash time is set by default for operating the phone on the main connection. You must
change it if necessary if you connect the phone to a PABX (see the user guide for your PABX).
The flash time specifies the duration of the line interruption used to send control signals to
the exchange or the telecommunications system (call transfer, setting up a consultation call
etc.).
u
Gigaset.net
The Gigaset.net connection is preconfigured in your phone. Your phone is preassigned a
Gigaset.net number.
You can activate and deactivate the Gigaset.net connection. If the connection is deactivated,
the phone will not register with the Gigaset.net service. You are then not available via the
Gigaset.net connection.
Click the corresponding [Edit] button to change the name of the Gigaset.net connection and
deactivate STUN.
The Gigaset.net connection uses a STUN server as standard. In the sent data packets,
Gigaset.net replaces the private IP address of your phone with its public IP address.
If you operate your phone behind a router with symmetric NAT, STUN cannot be used. You
must deactivate it. Otherwise, when making Gigaset.net calls you will not be able to hear the
caller.
¤
Telephony Connections
Configuring the phone via the Web configurator
107