Parameterizing The Pmu On The Device - Siemens 7SJ82 Manual

[scpmubif-210415, 1, en_US]
Figure 10-19
Routing Indications
The routable indication
•
raises when the PMU is connected to the PDC
•
clears when the connection to the PDC is interrupted.
[scparami-260912-01.tif, 1, en_US]
Figure 10-20

Parameterizing the PMU on the Device

10.9.7
You can also change the PMU settings directly on the device. To do this, select the desired PMU instance on
the device display. By selecting menu item Settings you then access the editable setting values (see
Figure 10-21). Note that the parameter Port cannot be changed, because this corresponds to the physical
slot position of the communication module in question.
SIPROTEC 5, Overcurrent Protection, Manual
C53000-G5040-C017-8, Edition 07.2017
Information Routing in DIGSI 5
ChannelLive of the PMU log
Log Indication for Display of the PMU/PDC Connection
Measured Values, Energy Values, and Supervision of the Primary System
10.9 Phasor Measurement Unit (PMU)
1341