Setup Screen (Ez View) Ip Port Settings - Campbell NL116 Instruction Manual

NL116 Ethernet and CompactFlash
6
® Module
c. Input the datalogger's IP address and port number and press Next. The IP
address and port number are input on the same line separated by a colon.
IPv6 addresses will need to be enclosed in square brackets. An IPv4
address may look like 192.168.1.100:6785. An IPv6 address may look
like [2001:db8::1234:5678]:6785. (The datalogger default port number is
6785. It can be changed using DevConfig.)
FIGURE 4-5. Setup screen (EZ View) IP Port Settings