Step 2: Loggernet Setup; Setup Screen (Ez View) Datalogger Type - Campbell NL116 Instruction Manual

NL116 Ethernet and CompactFlash
NOTE

4.2.2 Step 2: LoggerNet Setup

4
® Module
The NL116 must be connected to the datalogger before
configuring the datalogger with DevConfig. If it is not connected,
the TCP/IP settings will not be displayed.
The next step is to run LoggerNet and configure it to connect to the datalogger
via the Ethernet port.
a. In the EZ View of the LoggerNet Setup screen, press Add. Press Next to
advance to the Datalogger Type and Name screen. Select your
datalogger type and press Next.
FIGURE 4-3. Setup screen (EZ View) Datalogger Type