Interfaces For Peripheral Devices; Ethernet Interface; Ethercat Interface - Lenze P30GAP Series Operating Instructions Manual

6 Electrical installation

Interfaces for peripheral devices

Ethernet interface

6.4 Interfaces for peripheral devices
6.4.1 Ethernet interface
Figure Connection
X3:
Ethernet LAN
IPC001
If the RJ45 plug connection is exposed to oscillating or vibrating stress:
• Use a strain relief in the immediate vicinity of the RJ45 socket.
• Select the contact surface on which the device is mounted as fixing
point of the strain relief.
• Comply with the related minimum bending radius of the cable used.
6.4.2

EtherCAT interface

Support of this interface is in preparation!
Figure Connection
X2:
a .
EtherCAT
IPC001
If the RJ45 plug connection is exposed to oscillating or vibrating stress:
• Use a strain relief in the immediate vicinity of the RJ45 socket.
• Select the contact surface on which the device is mounted as fixing
point of the strain relief.
• Comply with the related minimum bending radius of the cable used.
30
Connection type
Network cable
CAT5e S/FTP
RJ45 socket
(recommended)
Cable length max. 100 m
Connection type
Network cable
CAT5e S/FTP
RJ45 socket
(recommended)
Max. cable length 100 m
Cable type
Cable type
Lenze • BA_p300 • 2.0