Assembling The Rotating/Detachable Poleclamp - Smiths Medical Medfusion 3500 Operator's Manual

Medfusion® Model 3500 pump V6 Operator's Manual
Assembling the rotating/detachable
poleclamp
1. If necessary, slide the rotating poleclamp
onto the poleclamp anchor at the rear of the
pump until the retainer lock button audibly
clicks into place.
2. Pull the round lock button at the top of the
clamp assembly up and rotate the clamp
to the desired angle. The poleclamp can be
rotated so the pump is horizontal, vertical,
or at a 45° angle to either side of vertical.
3. To remove the poleclamp from the pump,
pull the release lever toward the pump and
slide the poleclamp off the pump.
114