TP-Link T2500G-10TS User Manual page 85

Choose the menu VLAN→MAC VLAN to load the following page.
The following entries are displayed on this screen:
VLAN Table

MAC Address:
Description:
VLAN ID:
MAC VLAN Table

MAC Select:
Select:
MAC Address:
Description:
VLAN ID:
Operation:
Configuration Procedure:
Step Operation
1 Set the link type for
port.
2 Create VLAN.
Figure 6-7 Create and View MAC VLAN
Enter the MAC address.
Give a description to the MAC address for identification.
Enter the ID number of the MAC VLAN. This VLAN should be one
of the 802.1Q VLANs the ingress port belongs to.
Click the Select button to quick-select the corresponding entry
based on the MAC address you entered.
Select the desired entry. It is multi-optional.
Displays the MAC address.
Displays the user-defined description of the MAC address.
Displays the corresponding VLAN ID of the MAC address.
Click the Edit button to modify the settings of the entry. And
click the Modify button to apply your settings.
Description
Required. On the VLAN→802.1Q VLAN→Port Config page, set
the link type for the port basing on its connected device.
Required. On the VLAN→802.1Q VLAN→VLAN Config page, click
the Create button to create a VLAN. Enter the VLAN ID and the
description for the VLAN. Meanwhile, specify its member ports.
75