Device Type:
Application Type:
Unknown Policy
Flag:
VLAN tagged:
Media Policy VLAN
ID:
Media Policy Layer
2 Priority:
Media Policy DSCP:
14.4.4 Neighbor Info
On this page you can get the LLDP-MED information of the neighbors.
Choose the menu LLDP→LLDP-MED→Neighbor Info to load the following page.
The following entries are displayed on this screen
Auto Refresh
Auto Refresh:
Refresh Rate:
LLDP-MED Neighbor Info
Select the desired port to display LLDP-MED information of neighbors of the
corresponding port:
Device Type:
Specify the auto refresh rate.
Application Type indicates the primary function of the
applications defined for the network policy.
Displays whether the local device will explicitly advertise the
policy required by the device but currently unknown.
Indicates the VLAN type the specified application type is using,
'tagged' or 'untagged'.
Displays the application (eg. Voice VLAN) VLAN identifier (VID)
for the port.
Displays the Layer 2 priority to be used for the specified
application type.
Displays the DSCP value to be used to provide Diffserv node
behavior for the specified application type as defined in IETF
RFC 2474.
Figure 14-10 LLDP-MED Neighbor Information
Enable/Disable the auto refresh function.
Specify the auto refresh rate.
Displays the device type of the neighbor.
:
255