Default Settings - TP-Link T2500G-10TS User Manual

Choose the menu Network Security→AAA→Dot1x List to load the following page.
Configuration Procedure:

1) Configure the 802.1X function both globally and on the supplicant-connected port. Please
refer to 13.6 802.1X
2) Go to Network Security→AAA→Global Conifg to enable AAA function.
3) Configure the 802.1X Aunthentication RADIUS server group in the Authentication Dot1x
Method List Table.
4) Configure the 802.1X Accounting RADIUS server group in the Authentication Dot1x Method
List Table.

12.5.9 Default Settings

Feature
Global AAA function
Enable password
RADIUS server
TACACA+ server
Server group
Authentication login method
list
for more details.
Default Settings
Disabled.
No password is defined.
Auth port is 1812.

Acct port is 1813.

Retransmit is 2 times.

Timeout is 5 seconds.

Communication port is 1812.

Timeout is 5 seconds.

Two server groups are preset: radius and tacacs.
All RADIUS servers are added in the server group radius.
All TACACS+ servers are added in the Server group tacacs.
The list contains local, and the default login username and
passwords are both admin.
220