Log Table - TP-Link T2500G-10TS User Manual

Severity
informational
debugging
The Log function is implemented on the Log Table, Local Log, Remote Log and Backup Log
pages.

15.2.1 Log Table

The switch supports logs output to two directions, namely, log buffer and log file. The
information in log buffer will be lost after the switch is rebooted or powered off whereas the
information in log file will be kept effective even the switch is rebooted or powered off. Log
Table displays the system log information in log buffer.
Choose the menu Maintenance→Log→Log Table to load the following page.
The following entries are displayed on this screen:
Log Info

Index:
Time:
Level Description
Informational messages
6
7 Debug-level messages
Table 15-1 Log Level
Figure 15-3 Log Table
Displays the index of the log information.
Displays the time when the log event occurs. The log can get the
correct time after you configure on the System->System
Info->System Time Web management page.
260