Snmp Community - TP-Link T2500G-10TS User Manual

Auth Mode:
Auth Password:
Privacy Mode:
Privacy Password:
User Table

Select:
User Name:
User Type:
Group Name:
Security Model:
Security Level:
Auth Mode:
Privacy Mode:
Operation:
Note:
The SNMP User and its Group should have the same Security Model and Security Level.

13.1.5 SNMP Community

SNMP v1 and SNMP v2c adopt community name authentication. The community name can limit
access to the SNMP agent from SNMP network management station, functioning as a
password. If SNMP v1 or SNMP v2c is employed, you can directly configure the SNMP
Community on this page without configuring SNMP Group and User.
Choose the menu SNMP→SNMP Config→SNMP Community to load the following page.
Select the Authentication Mode for the SNMP v3 User.
None: No authentication method is used.
•
MD5: The port authentication is performed via
•
HMAC-MD5 algorithm.
SHA: The port authentication is performed via SHA
•
(Secure Hash Algorithm). This authentication mode
has a higher security than MD5 mode.
Enter the password for authentication.
Select the Privacy Mode for the SNMP v3 User.
None: No privacy method is used.
•
DES: DES encryption method is used.
•
Enter the Privacy Password.
Select the desired entry to delete the corresponding User.
It is multi-optional.
Displays the name of the User.
Displays the User Type.
Displays the Group Name of the User.
Displays the Security Model of the User.
Displays the Security Level of the User.
Displays the Authentication Mode of the User.
Displays the Privacy Mode of the User.
Click the Edit button to modify the Group of the User and
click the Modify button to apply.
231