Media Bay Modules; Supported Media Bay Modules; Media Bay Module Descriptions - Avaya BCM450 Rls 6.0 Task Based Manual

Hide thumbs Also See for BCM450 Rls 6.0:
Table of Contents

Advertisement

Media Bay Modules

Media Bay Modules are installed in the BCM450's main unit to provide trunk
and extension capability. They can also be installed in the BCM450's
expansion unit to increase the Trunk and Extension capacities of the BCM.
Each Media Bay Module has a series of dipswitches located on the rear of the
unit. The dipswitches should be set as detailed in the BCM450 Media Bay
Modules Guide.
Note: For full details of Media Bay Module assignment, installation, and
configuration, please refer to the BCM450 Media Bay Modules Guide.

Supported Media Bay Modules

The following Media Bay Modules are supported on the BCM450:
 Digital Trunk Modules:
o DTM (digital trunk module)
o BRI (ISDN Basic Rate trunk module)
 Analog Trunk Modules
o CTM4/8 (4/8-port analog CLID trunk module)
o GATM4/8 (global 4/8-port analog trunk module)
o ADID4/8 (4/8-port analog direct inward dial)
 Digital Station Modules
o DSM16(+)/32(+) (16/32-port digital station module)
 Analog Station Modules
o ASM8/8+ (8-port analog station interface)
o GASM8 (global 8-port analog station interface)
 Combination Modules
o 4/8x16 Combo (4/8 analog trunks, 16 digital stations,
combination of CTM4/8 & DSM16)
o G4/8x16 Combo (global 4/8 analog trunks, 16 digital stations,
combination of GATM4/8 & DSM16)
 Special Modules
o FEM (Fibre Expansion Module, connects legacy Norstar
expansion modules to the BCM)
o R2MFC

Media Bay Module Descriptions

The following sections describe the hardware attributes and functionality of
the Media Bay Modules.
Digital Trunk Modules
When configured on a North American BCM system, the DTM connects a T1
or PRI circuit to the BCM system; T1 circuits provide 24 digital channels to the
PSTN, while PRI circuits provide 23 digital channels to the PSTN.
When configured on an International BCM system, the DTM connects an ETSI
ISDN (E1) or PRI (E1) circuit to the BCM system, providing a maximum of 30
digital channels to the PSTN
NN40011-001 Issue 1.2 BCM450 Rls 6.0
.
BCM450 Hardware & Installation
19

Advertisement

Table of Contents
loading

Table of Contents