Accessing The Bcm's Command Line Interface Via The Serial Port - Avaya BCM450 Rls 6.0 Task Based Manual

Accessing the BCM's Command Line Interface via the Serial
Port
The Serial Port of the BCM450 is located on the front panel.
Note: The CLI method of accessing the BCM is intended for experienced
technicians, or as directed by Avaya Technical Support. Improper use of the
CLI may result in data loss.
Note: To use this method of accessing the BCM your PC must have a serial
port. You will also require a 9-pin female connector serial cable.
1. Connect the serial cable to the serial port of the pc and to the serial
port of the BCM
2. Open a terminal emulation program such HyperTerminal (Start,
Programs, Accessories, Communications, HyperTerminal if using the
Windows™ Classic Menu).
3. HyperTerminal prompts for a name for this connection. Enter a
suitable name and click OK.
4. Select the COM port you are connected to the BCM by, and click on
OK.
NN40011-001 Issue 1.2 BCM450 Rls 6.0
BCM450 Hardware & Installation
81