Setting Up The 'Standby' Function - ABB PQFM Instruction Manual

- CT installation settings ([/Welcome/Settings/Installation set./CT Installation])
- % Rating setting ([/Welcome/Settings/Installation set./Rating])
Where applicable the settings for individual units in a filter system can be reviewed by
selecting the appropriate unit.
Note that the settings of the above-mentioned parameters can only be changed at the
commissioning level (Cf.

7.9.3.1 Setting up the 'standby' function

136 The PQF-Manager user interface ç Manual Power Quality Filter PQFM
Section 7.9.2).