The 'Customer Settings' Menu - ABB PQFM Instruction Manual

The installation settings level allows for the commissioning engineer to set up
-
advanced system functions such as the filter auto restart and standby functions,
the clock, the communication of Modbus and PQ-Link and the setting of a system
lock with password.
For information purposes the installation settings level also shows the settings
for the network voltage and frequency, the rating of the filter unit(s), the CT
parameters and the derating factor that has been set-up at the commissioning
level.
[/Welcome/Settings/Installation set.]
- Apart from above three, the fourth button allows the language setting. The PQF-
Manager supports six languages: English, French, German, Spanish, Chinese
(simplified) and Korean.
Note: In active filter systems consisting of more than one master, the PQF-Manager of
the master that has the control over the system has full functionality and the PQF-
Managers of the other master units have limited functionality. In practice, the functions
that are not enabled on these units are locked and a
functions are set up in the 'real' master and are automatically further dispatched to the
other units by the control system.
All functions and measurements (e.g. digital I/O, temperature) which are "hardwired" to
a PQF-Manager provide data/control only for that specific filter unit.
7.9.1

The 'Customer settings' menu

112 The PQF-Manager user interface ç Manual Power Quality Filter PQFM
The installation settings level is accessed through
symbol will appear. These