Table of Contents
Advertisement
The filter current spectrum for all phases (3-W mode) and the neutral current spectrum
(4-W mode) in table format for the complete filter system. The table layout is similar to
the one of the voltages
Note: For a multi-unit filter system, the total filter current is an approximate value. More
detailed values for the individual units can be obtained in the 'Filter currents'-menu.
7.8.2.5 Powers
The power in the system at the location of the CTs: (Refer
of the parameters).
-
Active power P
-
Reactive power Q
-
Apparent power S
-
Power factor PF
-
Displacement power factor cos j
7.8.2.6 Temperatures
Refer to
Table 43
for an explanation of the parameters.
Temperatures may be expressed in °C and in °F. For changing the temperature
-
unit, go to [/Welcome/Settings/Customer set. /Temp unit].
(Figure
64) but only absolute current values are shown.
Manual Power Quality Filter PQFM ç The PQF-Manager user interface 109
Table 43
for an explanation
Advertisement
Table of Contents
Troubleshooting
