Configuring The Lcd Display - Emerson Rosemount 2090P Reference Manual

Reference Manual
00809-0100-4108, Rev CB
Damping with AMS Device Manager
1. Right select the device and select Configure.
2. Select Manual Setup.
3. Within the Pressure Setup box, enter desired damping value and click Send.
4. Carefully read the warning and click Yes if it is safe to apply the changes.
Damping with a LOI
Reference
Figure 2-12. Damping with LOI
VIEW CONFIG
ZERO TRIM
UNITS
RERANGE
LOOP TEST
DISPLAY
EXTENDED MENU EXTENDED MENU
EXIT MENU
2.9

Configuring the LCD display

The LCD display configuration command allows customization of the LCD display to suit
application requirements. The LCD display will alternate between the selected items.



In the following instructions, the LCD display can also be configured to display configuration
information during the device startup. Select Review Parameters at Startup to enable or
disable this functionality.
Reference
Configuring LCD display with a Field Communicator
From the HOME screen, enter the Fast Key sequence
Device Dashboard Fast Keys
Configuring LCD display with AMS Device Manager
1. Right select on the device and select Configure.
2. Select Manual Setup, select the Display tab.
3. Select desired display options and click Send.
Configuration
Figure 2-12 to enter damping values using an LOI.
EXTENDED MENU
CALIBRAT
DAMPING DAMPING
TRANSFER FUNCT
SCALED VARIAB
ASSIGN PV
TAG
ALARM SAT VALUES
PASSWORD
SIMLATE
HART REV
BACK TO MENU
EXIT MENU
Pressure Units

% of Range

Scaled Variable
Figure 2-2 on page 7
Sensor Temperature
mA/Vdc Output
LCD display with LOI for image of LCD display screen.
2, 2, 4
Configuration
November 2017
17