Installation - D-Link DAP-2660 Quick Installation Manual

Wireless ac1200 concurrent dual band poe access point

Hide thumbs Also See for DAP-2660:

Table of Contents

Available languages

All manuals and user guides at all-guides.com

Installation

Power on the access point

To power on the DAP-2660, you can use one of the following methods:

1. Connect the supplied power adapter, OR

2. Plug one end of your Ethernet cable into the LAN port of the DAP-2660, and the other end into a port on a

PoE switch.

Configure the access point

Connect the access point and your computer directly via a straight-through Ethernet cable. Manage the

access point from the computer.

Ensure your computer is configured with a static IP address in 192.168.0.0/24 subnet.

Launch a web browser, type the default IP address of the access point (http://192.168.0.50 or

https://192.168.0.50) and then press Enter.

Username: admin

Password: [Leave the password field blank]

Solid wall or ceiling

Installation

1. Place the mounting bracket on a wall or ceiling. Use a pencil to mark the holes.

Table of Contents