Table of Contents
Advertisement
CHANGE PASSWORD
Default setting:
N/A
Select this option when making changes or creating a new
password. Ensure that PASSWORD MODE is set to On. Select
Change
and you will be prompted to enter the current valid
password (use the factory password 1379), then to enter and also
to confirm your New Password (the factory password cannot be
deleted or changed). The user password and the factory
password can now both be used. You can change the user
password at any time after entering a valid password. The user
password is useful for allowing others - for example a babysitter
- temporary access to Parental Control settings.
PARENTAL
Default setting:
Off
The Parental Lock allows you to limit the use of your DVD
Player to only those DVD discs that do not exceed the rating
you specify. When the Parental Control is set, DVD discs that
support this feature will play only after the password has been
entered. However, typically only discs produced by major
entertainment companies support Parental Control. You can
choose from eight levels of Parental Control, corresponding to
the standard rating system in the USA. You will need to enter a
valid password before making changes to Parental Control
settings. The factory password - 1379 - will always be a valid
password. You can also use a New Password which you can
create. Please refer to the Password section for further
instructions.
Note on parental security
!
Remember to keep in mind that the key to the Parental
Control feature is the factory default password of 1379.
Consequently, your player may not be secure if this manual is
accessible by your children.
The GENERAL SETUP PAGE
. .
General Setup Page
Angle Mark
Captions
Screen Saver
PBC
Memory
Version
Default
Go to General Setup Page
ANGLE MARK
Default setting:
On
Requires disc to support the multi-angle feature, the Angle
Mark continuously displays the current angle you're viewing
on screen. Setting ANGLE MARK to
continuous display, and the current angle will be displayed on-
screen for just a few seconds after an angle change.
THE DVD PLAYER SETUP MENU
. .
On
Off
Off
On
Off
Off
will cancel
CAPTIONS
Off
Default setting:
Setting CAPTIONS to
Caption supporting discs are used. If you don't wish to
automatically enable captions, set this option to
SCREEN SAVER
Off
Default setting:
Protect your portable player's LCD or TV's cathode-ray tube
from "screen burn" that could result from a static image being
displayed for a prolonged period. The Screen Saver will
automatically start within a few minutes of video inactivity. To
enable this function, set this option to
PBC
Default setting:
On
Video CD's with PBC ( Playback Control ) contain menus on
the disc which enable easy access to the contents of the disc.
Select
Off
if you wish to disable this feature.
MEMORY
Default setting:
Off
Allows you to restart a DVD movie from the last place played
at a future time provided the DVD player continues to be in
Stand-By mode. If you desire this feature to be enabled, set
this option to
On.
VERSION
Displays information about the unit's Firmware and Hardware
versions. This information may be asked for by Tech Support
for trouble-shooting purposes.
DEFAULT
If you would like to return all settings of your DVD Player's
Setup to the factory defaults, choose
This will reset all values for General, Audio, Video and
Language settings, with the exception of the Parental Control
and Password. After all, the Parental Control and Password
features would be of little use if your kids could simply clear
The EXIT SETUP PAGE
. .
. .
Exit Setup Menu
Press "Enter" on the remote control to exit the Setup Menu.
32
35
On
will display captions when Close
On
.
DEFAULT - RESET
. .
. .
Video Setup Page
Video Setup Page
Off
.
.
Advertisement
Table of Contents
