Denver MT-703 User Manual page 18

Connecting external audio video source
Your DVD player can become an audio video output device -
using the LCD and speakers - for most camcorders, VCR s, etc.
For example, you can use your camcorder s composite video
and analog stereo outputs to connect to the unit for playback.
1
Use the included Video Cable to connect the Video
Output of your output device (Camcorder, etc) to the
unit s Video (Input) connector. '
1 2
POWER
ON
OFF
2 2
Next, connect the stereo analog audio outputs of the
external device to the audio input plug of the player.
3
Turn on the output device, then the DVD player and
select output on the Camcorder.
4
Press the MONITOR key on the front panel or VIDEO
MODE key on the remote control two times. The power
indicator will now glow orange to indicate it is now
ready to accept an external device input.
PORTABLE DVD PLAYER
BOOKMARK
AUDIO / VIDEO CONNECTIONS AUDIO / VIDEO CONNECTIONS AUDIO / VIDEO CONNECTIONS
'
1 1
VIDEO VIDEO VIDEO VIDEO
OUT IN IN IN
STEREO AUDIO OUT STEREO AUDIO IN STEREO AUDIO IN STEREO AUDIO IN
POWER LCD SETUP MONITOR
TITLE MENU GOTO DISPLAY
ANGLE SUBTITLE PROGRAM
'
R R R R
(RED) (RED) (RED) (RED)
L L L L
(WHITE) (WHITE) (WHITE) (WHITE)
18